This is the Traxxas VXL-3S Electronic Speed Control. The Velineon™ VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles and intuitive programming. Tri-mode operation auto detects the motor type for brushed, sensored or sensorless brushless motors. The VXL-3s™ uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5™ family of ESCs so there’s no tricky new procedures to learn. Traxxas’ exclusive patent-pending Training Mode™ is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3s is equipped with two-stage low voltage detection to allow LiPo battery use, including powerful 11.1-volt 3S packs! Features
- The VXL-3s auto-detects the motor type for brushless and sensored brushless motors.
- Traxxas High-Current Connector eliminates a common bottleneck and maintains pure, unrestricted power flow from the battery to the brushless power system.
- Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold.
- Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt)
- The patent-pending Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3s by 50%, making it easier for new or younger drivers to control their model. When they’re ready, simply change profiles to unleash full-throttle action.
- Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There’s no need for additional sensor wiring and hardware complexity.
- The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures.
- The VXL-3s is programmable with three drive profiles: Sport Mode – Fwd / Brake / Rev ~ Race Mode – Fwd / Brake ~ Training Mode™ – 50% Fwd / Brake / 50% Rev
- Multi-color LED provides clear feedback
- Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
- Micro-fin aluminum heatsink dissipates heat.
- The built-in auxiliary fan output powers a snap-on accessory fan for increased cooling capacity during extreme use. A handy clasp on the speed control case keeps the wire neatly in place until you are ready to use it.
- MOSFET design provides high-current output (320 amp peak) with incredibly low resistance (.00075 (ohm)).
- Gold plated 3.5mm bullet connectors on 12-gauge Maxx® Cable flow full power to the motor without performance strangling resistance.
Specifications: Input voltage: NiCad/NiMH 4-9 Cells / LiPo 2-3 Cells Case Size: 39x55x33mm (WxDXH) Weight: 90 grams Motor Limit: None On Resistance Forward: 0.00075 Ohms On Resistance Reverse: 0.00075 Ohms Peak Current - Forward: 320A Peak Current - Reverse: 320A Braking Current: 320A Continuous Current: 200A BEC Voltage: 6.0V BEC Current: 2.5A (with 6-cell NiMh) Power Wire: 12 Gauge Maxx® Cable Input Harness Wire: 26 Gauge / 100mm Transistor Type: MOSFET Low Voltage Detection: Auto-detect (2-S or 3-S Lipo), 2-Stage indicators, switchable (on or off) Thermal Protection: 2-Stage thermal shutdown Profile selection: Profile 1: Sport Mode: 100% fwd, 100% brakes, 100% rev Profile 2: Race Mode: 100% fwd, 100% brakes, no rev. / Profile 3: Patent Pending Training Mode™: 50% fwd, 100% brakes, 50% rev. Single-button setup: Yes, Traxxas EZ-Set® Battery Input Connector: Traxxas High-Current Connector Motor Types (Autodetect): Brushed, brushless, sensored brushless Ports: RX Input, motor sensor, auxiliary fan
Part Compatibility: | Traxxas Slash 4x4 | Traxxas Stampede 4x4 | Traxxas Rally | Traxxas Slash 4x4 Ultimate | Traxxas Rustler | Traxxas Stampede |
|